So the work on the Orc continues…

I haven’t been diligent in my postings for this SBS. A combination of work, getting a new dog and being lazy have all contributed to my lack of posts. Anyhow, I did manage to work on the Orc and move things forward a bit. It's Halloween and I've been tasked with candy duty, so I figured I post something. This is Lila, the new dog. She's part black lab/beagle/daschund. About a year old and fairly high energy. Rather high energy, she keeps life interesting.

I tackled the shield first.  I cleaned up all the seams, added wood texture to the back (I used a small X-Acto saw and scraped the metal to represent wood grain) and then used a sharpened dental pick to add a bit more detail. The front portion was sanded smooth and thinned auto-body filler (I thinned it with Testors Liquid Cement) was liberally slathered all over to fill in the many pits that covered the shield. Someone suggested to me that the pits would look good—like battle damage. Unfortunately, they looked more like a moonscape and I decided to fill them in. Battle damage will be added with a file and a motor tool set on a low setting. I’ll also use paint to simulate wear and tear. The shield had big rivets encircling the outer edge. I sanded them down and replaced them with rivets punched from lead foil. When I was in high school (late 70’s), I worked as a lowly dishwasher at a nearby Italian restaurant and was able to score quite a few sections of lead from the wine bottles. It’s real lead, not the plastic covered foil they use now. Even though I hated that job, I consider myself lucky for being able to horde a decent stash of lead foil.

The sword also needed some work. After I spent an inordinate amount of time cleaning up the sword, I wrapped the handle with some fine copper wire and secured with a few dabs of super glue gel. I then cut two thin strips of Tamiya tape and wrapped the scabbard. This was going to be a dry run (stuff never works right the first time) but everything turned out good, so I let it be. The tape is held in place with it’s own adhesive—the ensuing primer will hold the tape tight. I need to come up with some type of strap or belt so the sword just doesn’t attach directly to the belt. Maybe a few strips of lead foil will do the trick.

 So, that's that. Lot's more to do on this beast including the teeth and lower body armor. 

RJH

Squadron Man-Orc of the White Hand S-B-S

Some of my fondest modeling memories are from the 70’s when I was growing up in the Detroit area.  Starting when I was 13 (1974), visiting the local hobby shops became a part of my weekly routine. Some where within bike riding distance, others I had to con my father into driving me. On a semi-regular basis I’d visit West Point Hobbies, Nankin Hardware & Hobby (before it was remodeled and had some cranky old lady always watching us) and Walt’s (the dinky place on the corner of Michigan Avenue and Telegraph).  Perhaps three of four times a year my father, brother and I would make the pilgrimage to the eastside  and hit the Squadron Shop. This was the dumpy storefront on 9 Mile Road where rumor was that Jerry Campbell kept Don Greer shackled to a desk while he cranked out color art work for Squadron Signal.  Anyhow, around this time Squadron decided to get into the 54mm figure business and then proceeded to put out a varied (quality and subject matter) stable of figures. I bought a few, but during this time I was an armor geek and most of the stuff didn’t garner my attention. Okay, now it’s 2012, I’m much older (but not much wiser) and while wasting time on EBay looking for figures I’d never paint, I came across a 54mm Squadron/Rubin Man-Orc of the White Hand for $6.

 I had wanted this figure so bad when I was kid but never got around to buying it. Without even thinking about it, I put it on my watch list and patiently kept an eye on it (actually, I checked it several time a day to make sure that no other lunatic besides myself would show any interest in it). When the time came (like one minute left), I placed my bid and chewed my nails while the seconds ticked away. No one else had the poor judgment I had shown and I won the figure. A few days later Mr. Mailman delivers my figure and I’m a happy boy.  So after opening up the bag and looking at what I had spent my six bucks on, I decided that I’d do an S-B-S on trying to bring the Man-Orc up to snuff. This is what I started with:

The figure itself bears a strong resemblance to Fleagle from the Banana Splits. The casting is heavy, with mold lines everywhere, serious flash issues and pits galore. Like I expected anything else? So I jumped in and started to clean the beast up.

 The shield is cool with a big ol’ hand on it. Unfortunately, it’s mildly out-of-round, has some serious pit issues and the rivets look like Stevie Wonder placed them.

 The sword leaves a lot to be desired. A bit of work is required.

The axe looks pretty good. Not sure if I’ll get crazy and replace the handle (probably will).

The helmet needs some work – seams and pits. The horns will be replaced with something shorter and from plastic.

The massive base will be hacked away. Hacked away is the only way to describe this dreaded operation.

Then there are the arms. You get two pair - one for the dude with the axe and a set for the dude with the bow. I went for the axe, I just can't picture an Orc with a bow and arrow.

 So this is what I’ve gotten myself into…

Welcome to The Duckboard Gazette

Welcome to The Duckboard Gazette.  I’ve been a modeler of one sort-or-another for over 40 years (doesn’t seem that it’s been that long) and for the last 10 years have concentrated solely on figures. My main areas of interest are World War One, the American Civil War, the series of wars fought between the Finns and Russians and the French Foreign Legion. To keep things interesting, I also paint fantasy figures-Games Workshop, Reaper and anything that catches my eye. I'm an acrylics painter, I just can't get the hang of oils. After 10 years of serious (yeah right) figure painting, I feel that I finally know what I'm doing.